Table of Contents
Advertisement
The CN8600 can be accessed directly from a local console's keyboard/mouse/
monitor or via a laptop application (AP) program at the local site.
Console Lock Switch
Use this switch to lock the console so that remote access is disabled (view only)
and only the local console can operate the CN8600.
When set to unlock, the CN8600 grants access depending on the configuration
stored.
Local Console
Use the keyboard, mouse and monitor to directly access and operate the local
console port. The CN8600 is able to split the signal to both the local and remote
consoles.
The local console has priority by default. Refer to Console Lock Switch
on page 9.
To configure concurrent usage for the local console user and remote
console user(s), refer to Multiuser Mode on page 55.
Message Tag
When a remote user logs on to the CN8600, a message tag displays in the local
console. This serves as a reminder to the local user that operations may be
affected. Close the message tag by pressing the ESC key.
If the local user does not want operations to be disrupted, make sure the
Console Lock Switch is locked to the local console. The message tag does not
appear in this case.
Chapter 8
Local Console
109
Advertisement
Table of Contents
