Table of Contents
Advertisement
CN8600 User Manual
Gamma Adjustment
If it is necessary to correct the gamma level for the remote video display, use
the Gamma function of the Video Adjustment dialog box.
Under Basic configuration, there are ten preset and four user-defined levels to
choose from. Drop down the list box and choose the most suitable one.
For greater control, clicking the Advanced button brings up the following
dialog box:
The additional options in the Advanced screen are as follows:
Option
RGB
Gamma
76
Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component of
the image is correspondingly increased.
If you enable Set to Grayscale, the remote video display is
changed to grayscale.
This section allows you to adjust the video display's gamma
level.
Click and drag the diagonal line at as many points as you wish to
achieve the display output you desire.
Click Save As to save up to four user-defined configurations
derived from this method. Saved configurations can be recalled
from the list box at a future time.
Click Reset to abandon any changes and return the gamma line
to its original diagonal position.
Usage
Advertisement
Table of Contents
