Appendix
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
KN1108VA / KN1116VA in order to give it an IP address that users can
connect to. There are three methods to choose from. In each case, your client
computer must be on the same network segment as the KN1108VA /
KN1116VA. After you have connected and logged in you can give the
KN1108VA / KN1116VA its fixed network address. (See Operating Mode,
page 148.)
The Local Console
The easiest way to assign an IP address is from the local console. Refer to
Network, page 150, for details on the procedure involved.
IP Installer
For client computers running Windows, an IP address can be assigned with the
IP Installer utility. The utility can be obtained from the Download area of our
website. Look under Driver/SW, and the model of your switch. After
downloading the utility to your client computer, do the following:
1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
228