DNS Server
The KN9008 / KN9016 can either have its DNS server address assigned
automatically, or a fixed address can be specified.
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically, radio button.
To specify a fixed address, select the Use the following DNS server
address, radio button and fill in the required information.
Note: Specifying at the alternate DNS Server address is optional.
IP Installer
The IP Installer is an external Windows-based utility for assigning IP addresses
to the KN9008 / KN9016.
Click one of the radio buttons to select Enable, View Only, or Disable for the
IP Installer utility. See p. 145 for IP Installer details.
Note: 1. If you select View Only, you will be able to see the KN9008 / KN9016
in the IP Installer's Device List, but you will not be able to change the
IP address.
2. For security, we strongly recommend that you set this to View Only
or Disable after using it.
Finishing Up
After making any network changes, be sure Reset on exit on the Customization
page (see Customization, page 68) has been enabled (there is a check in the
checkbox), before logging out. This allows network changes to take effect
without having to power the KN9008 / KN9016 off and on.
Chapter 6. Administration
57