Maintenance
The Maintenance screen allows the Administrator to upgrade the CN8600's
firmware, view the monitor's EDID, backup/restore the CN8600's
configuration settings and ping an IP address.
Upgrade Main Firmware
As new versions of the CN8600 firmware become available, they can be
downloaded from our website. Check the website regularly to find the latest
information and packages.
To upgrade the firmware, do the following:
1. Download the new firmware file to your computer.
2. Open your browser; log in to the CN8600; and click Maintenance in the
left panel menu to bring up the Firmware File dialog box as follows:
3. Click Browse; navigate to the directory that the new firmware file is in
and select the file.
4. Click the Upgrade Firmware button.
If Check Firmware Version is enabled, when you perform an upgrade the
current firmware level is compared with that of the upgrade file. If the
current version is higher than the upgrade version, a message appears
informing you of the fact and the procedure stops.
Note: If you want to install an older firmware version, you must uncheck
the Check Firmware Version checkbox before clicking Upgrade
Firmware.
Chapter 4. Configuration
23