Table of Contents
Advertisement
and 100 MAC filters are allowed. If any filters have been configured, they
appear in the IP Filter and/or MAC Filter list boxes.
To enable IP and/or MAC filtering, put a check mark in the IP Filter Enable
and/or MAC Filter Enable checkbox.
If the Include button is checked, all the addresses within the filter range
are allowed access; all other addresses are denied access.
If the Exclude button is checked, all the addresses within the filter range
are denied access; all other addresses are allowed access.
Adding Filters
To add an IP filter, do the following:
1. Click Add. Key in the IP address range you want to filter, and click OK:
2. Repeat these steps for any additional IP addresses you want to filter.
Chapter 4. Configuration
41
Advertisement
Table of Contents
