Connecting To A Modem - Enterasys Matrix 7H4284-49 Hardware Installation Manual

5. With a PC connected to a remote modem, you can configure the switch remotely. To accomplish
this, you must configure your PC VT emulation package with the following parameters.
6. When these parameters are set, the Local Management password screen will display. Refer to
the Enterasys Matrix DFE-Platinum Series Configuration Guide for further information.
Figure 3-7 Connecting to a Modem
1 UTP straight-through cable with RJ45 connectors
2 RJ45 COM port
3 RJ45-to-DB25 modem adapter
Parameter
Mode
Transmit
Bits Parity
Stop Bit
Ä
Connecting to COM Port for Local Management
Setting
7 Bit Control
Transmit=9600
8 Bits, No Parity
1 Stop Bit
à Â
4 Local modem
5 Remote modem
Á
À
Installation 3-17