Installation - Enterasys Matrix 7H4284-49 Hardware Installation Manual

Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
This chapter provides the instructions to install the 7H4284-49 DFE module.
Follow the order of the sections listed below to correctly install the DFE module.
•
Unpacking the DFE Module
•
Installing a Network Expansion Module (NEM)
•
Backplane Connections and Installation Rules
•
Installing the DFE Module into the Matrix E7 or N7 Chassis
•
Installing the DFE Module into the Matrix N1, N3, or N5 Chassis
•
Connecting to the Network
•
Connecting to COM Port for Local Management
•
Completing the Installation
(Section 3.1)
(Section
(Section 3.6)
(Section 3.8)
(Section 3.2)
3.3)
(Section
(Section
(Section 3.7)
3

Installation

3.4)
3.5)
Installation 3-1