Enterasys Matrix 7H4284-49 Hardware Installation Manual page 42

Connecting to COM Port for Local Management
3. Turn on the PC and configure your VT emulation package with the following parameters:
4. When these parameters are set, the Local Management password screen will display. Refer to
the appropriate Enterasys Matrix DFE-Platinum Series Configuration Guide for further
information.
Figure 3-5 Connecting an IBM PC or Compatible
1 UTP straight-through cable with RJ45 connectors
2 RJ45-to-DB9 PC adapter
3-14 Installation
Parameter
Mode
Transmit
Bits Parity
Stop Bit
Ã
Setting
7 Bit Control
Transmit=9600
8 Bits, No Parity
1 Stop Bit
 3 RJ45-to-DB9 PC adapter
4 IBM PC or compatible device
Á