Park Brake - Taylor-Dunn BG-015-00 Operation, T Roubleshooting And Replacement Parts Manual

Park Brake

6. Release the park brake.
7. Inspect the brake shoes. The parking brake shoes are the same as the service brake shoes.
Refer to Inspect the Service Brake section to inspect the brake shoes.
8. Inspect all brake cables and linkages for any signs of damage or missing cotter pins.
9. Inspect the park brake ratchet for any signs of
damage or wear.
10. Set the park brake.
11. Reconnect the main positive and negative cables
at the batteries.
12. Remove the blocks from the wheels
Maintenance, Service, and Repair
1. Make sure the key-switch is in the "OFF" position, then remove the
key.
2. Place the Shift lever in the neutral position.
3. Set the park brake.
4. Place blocks under the front wheels to prevent vehicle movement.
5. Disconnect the main positive and negative cables at the battery.
If any sign of damage or wear is found on the park brake ratchet,
cables, or linkages then they must be repaired or replaced
immediately. Failure to repair or replace any damaged component
could result in failure of the park brake causing property damage
and/or severe bodily injury.
Brakes Page 5