Taylor-Dunn BG-015-00 Operation, T Roubleshooting And Replacement Parts Manual page 100

Maintenance, Service, and Repair
12. Inspect the spring bolts and spring hangers for signs of wear or damage. If any wear or damage
is found, then they must be replaced.
Damaged or worn spring bolts or hangers could result in sudden failure
of the suspension causing severe bodily injury or property damage.
13. Install the new spring in reverse order.
14. If the spring hanger bolts do not have a grease fitting, lube the spring bushings before installing
the spring.
15. Torque the spring hanger bolts to 20 ft-lbs.
16. If the spring bolts are equipped with grease fittings, lube them at this time.
17. Lower the vehicle.
18. Reconnect the main positive and negative cables at the batteries.
19. Remove the blocks from behind the wheels.
20. Release the parking brake and test drive the vehicle.
Suspension Page 4