Taylor-Dunn BG-015-00 Operation, T Roubleshooting And Replacement Parts Manual page 91

10. Remove the brake shoes. Refer to
regarding removing the brake shoes.
11. Remove the axle. Refer to the
axle.
12. Remove bearing and spider off of the axle and discard the bearing and race. Refer to the
Transmission Manual
13. Install the new spider and axle bearing.
14. Reassemble in reverse order.
15. Bleed the brakes. Refer to
brakes.
16. Set the park brake.
17. Reconnect the main positive and negative cables at the batteries.
18. Lower the wheel to the ground.
19. Remove the blocks from behind the wheels.
20. Release the park brake and test drive the vehicle.
Hydraulic spider shown in the brake assembly
Maintenance, Service, and Repair
Replace Rear Brake Shoes
Transmission Manual
for information regarding removing the bearing.
Bleed the Brakes
section for information regarding bleeding the
Brakes Page 21
section for information
for information regarding removing the