Thermo Scientific iCAP Q Operating Manual page 93

!
!
!
!
Thermo Fisher Scientific
CAUTION
Hot Surface. Danger of burns. Switch off the plasma two minutes
before handling the torch or cones.
CAUTION
Sharp Edges. Danger of cuts. Be careful when handling the glassware
because this might break. Wear protective gloves.
CAUTION
Pinch Point Hazard. Danger of injuries. Keep hands clear from the
peristaltic pump during operation.
CAUTION
Potentially Harmful Materials. Danger of exposure. Always wear
protective gloves and safety glasses when you handle solvents or
corrosives. Also contain waste streams and use proper ventilation. Refer
to your supplier's Material Safety Data Sheet (MSDS) for proper
handling of a particular solvent.
It is the responsibility of the operator to maintain the system properly
!
by performing the system maintenance procedures on a regular basis.
Service by the operator must be performed by trained qualified
personnel only and is restricted to servicing mechanical parts. Service
on electronic parts must be performed by a Thermo Fisher Scientific
field service engineer only.
Never try to repair or replace any component of the system that is not
described in this manual without the assistance of your Thermo Fisher
Scientific field service engineer.
Only use fuses of the type and current rating specified. Do not use
repaired fuses and do not short-circuit the fuse holder.
Safety Guidelines for Maintenance
iCAP Q Operating Manual (P/N 1288090, Revision B)
Maintenance
8-3