Thermo Scientific iCAP Q Operating Manual page 72

Operation
Getting Ready
6-10 iCAP Q Operating Manual (P/N 1288090, Revision B)
Figure 6-3. Experiment Editor - Dashboard
2. If necessary, change the actual configuration:
a. Click
currently loaded configuration is marked with a green check
mark.
b. Select a new configuration with a mouse click.
c. Click OK to load the new configuration.
3. Click to start the instrument. A dialog will open in which
all modes to be used during the measurements can be selected.
Figure 6-4. Experiment Editor - Example of Get Ready window
4. If required, configure a delay for warmup of the instrument.
to display the available configurations. The
Thermo Fisher Scientific