Thermo Scientific iCAP Q Operating Manual page 111

Cleaning the Skimmer Cone
Maintaining the Skimmer Cone Insert
Thermo Fisher Scientific
Figure 8-12. Cone tool with skimmer cone
d. Carefully pull out the skimmer cone.
4. Remove the skimmer cone from the tool.
5. Remove the insert from the skimmer cone, see
Skimmer Cone Insert"
Figure 8-13. Cone tool and skimmer cone
For the cleaning procedure of the cone, see
and the Skimmer Cone"
❖
To replace the skimmer cone insert using the insert tool
1. Align the insert tool with the holes in the skimmer cone insert.
on page 8-21.
"Cleaning the Sample Cone
on page 8-19.
iCAP Q Operating Manual (P/N 1288090, Revision B)
Maintenance
Maintaining the Interface
"Maintaining the
8-21