EWM BUSINT X11 Operating Instructions Manual page 127

Error
number
(value)
53
99
255
The error numbers displayed on operating units are different from those transmitted via the field
bus.
(1)
An error has been assigned by the system which cannot be assigned. This situation can occur
with differences in the software versions between the power source and interface.
Item No.: 099-008225-EWM01
Operating problems, causes and remedies
Meaning
In a system with the option for WF case
switching, an attempt has been made to
switch to a WF which does not exist
No connection to the welding power source
(e.g. system shut down)
(1)
Unknown error
Error messages on the system
Relevance Error can be reset
to system
PHOENIX Yes
PHOENIX/TETRIX No, resets itself
PHOENIX/TETRIX Yes
127