Total Access 238 Command Line Interface Guide
ubr+ <peak cell rate> <min cell rate>
Purpose
Use the ubr+ <peak cell rate> <min cell rate> command to set the IMA interface peak cell rate
(PCR) and minimum cell rate.
Syntax Description
Table 24
displays the syntax descriptions for the ubr+ <peak cell rate> <min cell rate>
command.
Table 24. Syntax Description for ubr+ <peak cell rate> <min cell rate>
Syntax
peak cell rate
min cell rate
Default Values
The ubr+ peak and min cell rate are set to 0.
Command Modes
The IMA PVC Interface Configuration Mode is required for this command.
Functional Notes
The peak cell rate must be configured before data will pass since it is defaulted to 0.
Usage Examples
Set the peak cell rate to 25,000 cps and the minimum cell rate to 0 cps.
TA238(config-ima-vc0/35)#ubr+ 25000 0
58
Description
Set the peak cell rate (PCR) for the IMA interface. The range for the PCR is 0 to
the maximum data rate allowed by the IMA interface.
Set the minimum cell rate for the IMA interface. The range for the minimum cell
rate is 0 to the peak cell rate.
61200630L1-35C