login
Purpose
Use the login command to change the login id and/or password for the system.
Syntax Description
Table 16
displays the syntax descriptions for the login command.
Syntax
password <new
password>
username <new
username>
Default Values
The login command has no default values.
Command Modes
The Global Configuration Mode is required for this command.
Usage Examples
Change the system login username to local_user.
TA238(config)#login username local_user
Change the system login password to my_passwd.
TA238(config)#login password my_passwd
61200630L1-35C
Table 16. Syntax Description for login
Description
Changes the password for the system.
Changes the username for the system.
Global Configuration Mode Command Set
39