Table of Contents
Advertisement
Total Access 238 Command Line Interface Guide
show interfaces shdsl
Purpose
Use the show interfaces shdsl command to display configuration parameters, status
information, and performance statistics for the SHDSL interface.
Variations of this command include the following:
• show interfaces shdsl config
• show interfaces shdsl performance 15-minute link <1 to 8>
• show interfaces shdsl performance 24-hour link <1 to 8>
• show interfaces shdsl status link <1 to 8>
Syntax Description
Table 11
displays the syntax descriptions for the show interfaces shdsl command.
Table 11. Syntax Description for show interfaces shdsl
Syntax
config
performance
status
Default Values
The show interfaces shdsl command has no default values.
Command Modes
The Enable Mode Command prompt is required for this command.
Functional Notes
The following is a sample output of each show interfaces shdsl sub-command:
config
• SNR margin threshold
• Loop attenuation threshold
• Line termination mode
• Minimum line rate
• Maximum line rate
• Annex
24
Description
This variable displays SHDSL configuration.
This variable displays SHDSL link performance statistics in 15-minute and 24-
hour intervals. There is a current and previous bucket displayed for each
interval type.
This variable displays SHDSL link status information.
61200630L1-35C
Advertisement
Table of Contents
