Table of Contents
Advertisement
databits <option>
Purpose
Use the databits <option> command to set the number of data bits per character for a
terminal session. This value must match the configuration of your VT100 terminal or terminal
emulator software. The default is 8 data bits per character. Use the no form of this command
to return to the default value.
Syntax Description
Table 28
displays the syntax descriptions for the databits <option> command.
Table 28. Syntax Description for databits <option>
Syntax
7
8
Default Values
The databits option is set to 8 data bits.
Command Modes
The Console Interface Configuration Mode is required for this command.
Usage Examples
Configure 7 data bits per character for the console terminal session.
TA238(config-con 0)#databits 7
61200630L1-35C
Description
7 data bits
8 data bits
Line (Console) Interface Config Command Set
67
Advertisement
Table of Contents
