Table of Contents
Advertisement
Chapter 5
NETWORK OPTIONS
The NETWORK OPTIONS configuration parameters control the loop
operation of the DSU III ARdc.
Once a parameter is set, Command Accepted is displayed briefly before
returning to the active menu.
Loop Rate
The Loop Rate option sets the loop operating speed. The unit should be
set to the rate required by the DDS service. The DSU III ARdc also sup-
ports subrate DTE data over a 56 kbps or 64 kbps loop. The loop rate
must be set independently of the DTE rate. Eight loop rate selections are
available (shown in Figure 5-1).
61200270L1-1
Configuring Network Options
DSU III ARdc User Manual
5-1
Advertisement
Table of Contents
Troubleshooting
