Table of Contents
Advertisement
Total Access 238 Command Line Interface Guide
GLOBAL CONFIGURATION MODE COMMAND SET
To activate the Global Configuration Mode command set, enter the configure command at the
prompt using the following command:
TA238#configure
The following response is displayed:
TA238(config)#
The following commands are common to multiple command sets and are covered in a
centralized section of this guide. For more information, refer to the sections listed below:
•
"do"
on page 75
•
"exit"
on page 76
•
"no"
on page 77
All other commands for this command set are described in this section in alphabetical order.
•
"clock"
on page 31
•
"hostname <name>"
•
"interface ethernet <port>"
•
"interface ima"
on page 34
•
"interface shdsl"
•
"ip address <address> <mask> <gateway>"
•
"line console <line-number>"
•
"line telnet"
on page 38
•
"login"
on page 39
30
on page 32
on page 33
on page 35
on page 37
on page 36
61200630L1-35C
Advertisement
Table of Contents
