Systems Operation - Baileigh Industrial SH-120250-HD Operator's Manual

I Stroke Cycle Switch
Motor Start/Run
J
Switch
Emergency Stop
K
Switch
L Power Lamp

SYSTEMS OPERATION

CAUTION:
footwear, and leather gloves to protect from burrs and sharp edges.
Note: It is recommended the minimum cutting width be equal to or greater than 15
times the thickness of the material in order to have a good workpiece with clean edge and with
no twist or deformation.
Sets the system to function with the operator full foot pedal
stroke control or operator single touch foot pedal stroke control.
Press to start and run the hydraulic pump. The switch button
will illuminate green when the pump motor is running.
In the event of an unwanted or unsafe condition, press the E-
Stop to stop all machine functions.
Twist the knob to reset the switch.
The lamp will be illuminated when the main disconnect on the
electrical cabinet is powered on.
Always wear proper eye protection with side shields, safety
23
23