Technical Specifications; Technical Support - Baileigh Industrial SH-120250-HD Operator's Manual

TECHNICAL SPECIFICATIONS

Mild Steel Maximum Thickness
Stainless Steel Maximum Thickness
Minimum Material Thickness
Shear Length
Blade Rake Angle
Blade Clearance
Strokes
Maximum Ram Travel
Back Gauge Length (motorized)
Maximum Cutting Force
Maximum Hydraulic Pressure
Hydraulic Pump Flow
Hydraulic Reservoir Capacity
Main Motor
Back Gauge Motor
Power
Shipping Weight
Shipping Dimensions
Based on a material tensile strength of *64000 PSI – mild steel
**100000 PSI – stainless steel

TECHNICAL SUPPORT

Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
.25" (6.35mm) Mild Steel*
.118" (3mm)
24ga (0.607mm)
122" (3100mm)
.5° - 2.5°
Manual Hand Wheel .002" - .024" (.05 - .60mm)
14-45/min.
8.25" (210mm)
.4" – 29.5" (10 – 750mm)
32597lbf (145kN)
2175psi (15MPa)
10gpm (38Lpm)
29gal (110L)
10hp (7.5kw) 220V, 3ph, 60hz, 28A @1740rpm
0.5hp (0.37kw) 220V, 3ph, 60hz, 2A @1650rpm
220V 3-Phase / 60 Hertz
14,560lbs (6604kg)
159.25" x 112.5" x 69" (4045 x 2855 x 1750mm)
9
9