Baileigh Industrial SH-120250-HD Operator's Manual page 39

Parameter
XP
GP
DX
CL
pp
Others
1. Power on, the device displays the single-step parameter page automatically.
2. Press either the
parameter.
3. Press the start button to run the device. The device will enter the running page.
Note: Parameter can only be set when Stop indicator is on. The G axis is not
active and cannot be changed.
Multi-Step
If there are for example 5 pieces of material which need to be processed into three workpieces
with different length as noted in the following:
• The first sheet: Length is 4", Distance of retracting is 0.25".
• The second sheet: Length is 12", Distance of retracting is 0.25".
• The third sheet: Length is 24", Distance of retracting is 0.25".
Setting
6.00"
Not used.
0.2"
80 (typical default. Normally does not change.
10
According to the actual situation to set.
, , , or arrow keys to highlight and then modify the selected
36
36