Manual Movement - Baileigh Industrial SH-120250-HD Operator's Manual

Hydraulic shear

Table of Contents

Step 11

Press the

Step 12

program.

Note:

• In completion of multi-step programming, return to start step before launching the system;

otherwise the program will start position processing at the current step.

• Press left and right direction key to turn pages and browsing among all step parameters.

• Program can be called and revised again.

• In completion of processing all work pieces (50 in the example), system stops automatically.

Restart directly will start another round of processing 50 work pieces.

Manual Movement

In single-step mode, axis movement can be controlled by pressing key manually. This method

helps user to adjust machine tool and work piece.

Operation Steps

1. On single step parameter setup page, press the

Figure 2-10 Manual page

2. Press the

button to operate at low speed in the increasing direction.

Press the

button to operate at low speed in the decreasing direction.

Press the

increasing direction.

Press the

decreasing direction.

3. Press the

button to return to the single step parameter setting page.

arrow to return to the setup page of the first step.

start button and the system will execute according to this

: X current pos.

and the

buttons at the same time to operate at high speed in the

and the

buttons at the same time to operate at high speed in the

MANUAL

to enter manual page.

50.00

Table of Contents