Baileigh Industrial SH-120250-HD Operator's Manual page 46

The description of the PROGRAM parameters
Parameter Default
ST 0
pp 0
CP 0
5. Press the , or
set up, and input setting up value, and press the
take effect.
6. When the setup is complete, press the
page.
7. The system automatically makes the step number(s) based upon the value of "ST"
parameter on the PROGRAM page.
8. Pay attention to the sequence of the step labeling. 1 / 3ST: 1 indicates the current step, 3
indicates the total step. The machine will run in sequence.
9. Press the or
10. Press the or
value and press the
Range Unit Description
0-25 - The total number of steps in this program.
The number of processing workpiece in this
0-99999 -
program.
PP = O: This value is the current work piece.
0-99999 -
PP > O: This value is the remain work piece.
arrow key to select multi-step programming parameter which requires
arrow buttons to enter each step page for editing.
arrow buttons to select the parameter you want to modify. Input the
enter button to finish the operation.
enter button and the setup will
right arrow key to enter the step parameter set
43
43