Table of Contents
Advertisement
8. Repeat the steps for the 3 / 3ST page.
9. Press the
button to switch to PROGRAMS manage page.
10. Press the
start button to run the device. The device will enter the running page.
PROGRAMMING
This device has two programming methods, which are single-step programming and multi-step
programming. The user can set up programming according to actual demand.
Single-Step Programming
Single-step programming is generally used for processing single step to finish work piece
processing. That is, one cut into one piece of material, or several cuts into a sheet of material in
which every cut uses the same back gauge position. For example, if cutting a sheet of material
into the same size strips.
When the controller is power on, it will automatically enter single-step program page.
Operation Steps
1. After starting up, the device will enter set up page of single-step program automatically.
2. Press the
,
,
, or
arrow buttons to select the parameter which needs to be
set up.
39
39
Advertisement
Table of Contents
Troubleshooting
