Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
Country of Manufacture
Top Roll Diameter
Bottom Roll Diameter
Head Style
Throat Depth
Contact Wheel (Diameter x Width)
Lower Die Radius
Mild Steel Capacity
Aluminum Capacity
Power
Shipping Weight
Shipping Dimensions
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
United States
8" (203.2mm)
2.5" (63.5mm)
Rotating
21" (533.4mm)
8" x 2" (203.2 x 50.8mm)
Flat, 24" (609.6mm), 8" (203.2mm), 2" (50.8mm)
16ga. (0.0598" [1.519mm])
14ga. (0.0641" [1.628mm])
Manual
600lbs (273kgs)
60" x 48" x 80" (1524 x 1220 x 2032mm)
8
8
Advertisement
Table of Contents
