Sierra Wireless FX30S User Guide
Reset to Factory Default Settings
Warning:
ration settings in /etc and /data, including the root password.
Warning:
connecting to AVMS. If you perform a factory reset, please issue the AT command AT+WDSC=3,60
to ensure your device checks in to AVMS every 60 minutes.
To reset the FX30S to the factory default settings:
1. Ensure that the Recovery Activation status is set to Enable. (See
2. Upon applying power, press and hold the reset button for about 10 seconds.
Rev. 5 September 2020
Resetting the gateway to the factory default settings will remove all customized configu-
Performing a factory reset could result in your FX30S no longer automatically
Commands
on page 71.)
Factory reset button
Figure 2-25: Factory reset button
38
Factory Reset AT
41110485