Optional-Mounting In A High Vibration Environment - Sierra Wireless Octave FX30S User Manual

Optional—Mounting in a High Vibration
Environment
If you are mounting the FX30S in a high vibration area, Sierra Wireless strongly
recommends using two nylon cable ties to secure the FX30S on the bracket.
To secure the FX30S on the bracket:
1. Thread the ties into the holes on one side of the bracket and out the holes on the
2. Wrap the ties around the FX30S and insert the pointed ends of the ties into the blunt
Rev. 5 September 2020
other side of the bracket, as shown in
Figure 2-5: Inserting the cable ties
ends.
Figure 2-6: Inserting the ends of the ties
Figure 2-5 on page 15.
15
Installation and Startup
41110485