Airvantage Management Services Polling Mode; Airvantage Management Services User Agreements - Sierra Wireless Octave FX30S User Manual

Sierra Wireless FX30S User Guide
AirVantage Management Services Polling
Mode
The default FX30S configuration setting for AVMS Polling Mode is 60 minutes. The AT
command to change the setting is AT+WDSC=3,x where x is the number of minutes. See
the
Note: If you are experiencing issues with your FX30S not automatically checking in with AVMS,
then query the AV Polling rate using AT+WDSC?
If the result is +WDSC: 3,0 then AV Polling is disabled. Please enable polling using AT+WDSC=3,60
to set the polling rate to 60 minutes.
AirVantage Management Services User
Agreements
The default FX30S configuration for AVMS User Agreements is "Disabled" for the
following modes:
•
•
•
•
•
The AT command to change the user agreements is AT+WDSC. See the
WP75xx/WP76xx/WP77xx AT Command Reference
UART Settings
The default FX30S configuration setting for UART1 is for AT Command Service, and
UART2 is disabled. The AT command to change the setting is AT!MAPUART.
Rev. 5 September 2020
WP8548/WP75xx/WP76xx/WP77xx AT Command Reference
AVMS connection
Package download
Package install
Device reboot
Application uninstall
for more information.
82
for more information.
WP8548/
41110485