Cellular Antenna Connector
GNSS Antenna Connector
(See
Connect the Antennas
SIM card/IoT card holder
(See
Install SIM card and IoT card
Figure 1-1: FX30S Connectors, LEDs and SIM Card Holder
Power Modes
FX30S has three power modes:
•
•
•
For more information on power modes and power consumption, see
page 49 and
Accessories
The following items come with the FX30S gateway:
•
•
You can order the following items separately from Sierra Wireless:
•
•
•
Rev. 5 September 2020
on
page
19.)
on
page
12.)
Off
Ultra Low Power
Active
Power Consumption
DC power cable
Mounting bracket
Universal AC power adapter
· Voltage input: 100– 240 VAC
· Current output: 1.5 A
Compatibility bar (useful if you are replacing a Fastrack Supreme or a Fastrack Xtend)
Range of GNSS and cellular antennas
· Puck antenna (Cell & GNSS; part number 6001128) is recommended
LEDs (See
LED Behavior
on page 31.)
RS232/RS-485 Serial Port
USB 2.0 Micro-B Port
(See
Connect the Data Cables
on page 51.
9
Introduction to the FX30S
Power Connector
(See
Power Connector
on
page
22.)
Push Button
(See
External Push Button
on
page
76.)
on
page
21.)
Power Modes
on
41110485