9: Using the oMG
When powered up, the oMG will automatically connect to the WAN, allowing external
communications (e.g. you should be able to browse to
using a web browser on your PC).
Warning:
Sierra Wireless does not recommend powering down the oMG unexpectedly. When
wired correctly, turning the ignition off will cause the oMG to perform a graceful shutdown.
To manually power down the oMG:
1. Press the Reset button on the unit for 2 seconds, then release.
Reset
button
Figure 9-1: Reset Button on Rear Panel of the oMG
2. When all LEDs stop flashing unplug the power cable.
Warning:
Holding down the Reset button for 30 seconds will reset the unit to its factory
default configuration.
The oMG Operation and Configuration Guide listed in
details about how to customize your configuration. One essential customization is to
secure the built-in Wi-Fi access point of the oMG using the WLAN Config menu in the
LCI. The oMG supports WEP and WPA security.
Rev 1 Jul.16
http://www.sierrawireless.com
Table 1-1
15
9
on page 6 provides
4119612