Rev 5 Apr. 13
Rebooting the LS300
Rebooting resets the LS300, but leaves custom settings intact. To reboot the
LS300:
•
On the device, press and release the Reset button (1–6 seconds)
•
In ACEmanager, click the Reboot button on the toolbar.
Reset the LS300 to factory default
settings
To reset the device to the factory default settings:
•
On the device, press and hold the Reset button for 7–15 seconds. (Release
the button when all the LEDs turn yellowish-green.)
If you hold the button down for longer than 15 seconds, the device reboots,
but does not reset to the factory default settings.
The resetting and reboot cycle takes about 2 minutes to complete. Once the
LEDs resume their normal operating behavior, the reset is complete.
•
In ACEmanager, go to Admin > Advanced and click the Reset to Factory
Default button.
Installation and Startup
31