Airvantage Iot Platform; Reset To Factory Default Setting - Sierra Wireless FX30S User Manual

Rev 2 Mar.18
Here are some Linux shell command examples for GPIOs:
Table 2-9: Linux shell command examples
To...
Turn on the green User LED
Turn off the green User LED
Read the push button state
Read the analog input value (in µV)
• Legato Application Framework
For information on using Legato applications to manage GPIOs, refer to:
http://legato.io/legato-docs/latest/c_gpio.html
For information on using Legato applications to manage ADCs, refer to:
http://legato.io/legato-docs/latest/c_adc.html

AirVantage IoT Platform

AirVantage IoT platform offers advanced services for device management,
connectivity management and for enabling device to cloud applications.
AirVantage Device Management services are available through a web-based
operations console providing an intuitive and customizable user interface to
configure, monitor, and manage your deployed FX30S:
• Monitoring and Management
• Command and Control
• OTA Firmware Update
• Deployment Configuration
• Legato Application Lifecycle Management
Free and unlimited OTA Firmware Updates are offered with FX30S.
To get started, call your Sierra Wireless reseller or visit:
https://airvantage.net/

Reset to Factory Default Setting

To reset the FX30S to the factory default setting:
1. Ensure that the Recovery Activation status is set to Enable. (See
Reset AT Commands
2. Upon applying power, press and hold the reset button for about 10 seconds.
45
echo 0 > /sys/class/gpio/gpio48/value
echo 1 > /sys/class/gpio/gpio48/value
cat /sys/class/gpio/gpio7/value
cat /sys/class/hwmon/hwmon0/device/
mpp_05
on page 38.)
Installation and Startup
Use...
Factory
41110485