Step 2-Mount And Ground The Fx30S Chassis - Sierra Wireless Octave FX30S User Manual

Step 2—Mount and Ground the FX30S
Chassis
You can flat mount the FX30S or mount it on a DIN rail. An optional compatibility bar
allows you to use existing mounting holes if you are replacing a Fastrack Supreme or a
Fastrack Xtend programmable gateway. See
Fastrack Xtend Device
Mount the FX30S where:
•
•
•
•
•
You can mount the FX30S:
•
•
Rev. 5 September 2020
Figure 2-2: Installing the IoT Expansion card
on page 17.
There is easy access for attaching the cables.
Cables will not be constricted, close to high amperages, or exposed to extreme
temperatures.
The front panel LEDs are easily visible.
There is adequate airflow.
It is away from direct exposure to the elements such as sun, rain, dust, etc.
On a flat surface (page
On a DIN Rail (page 17)
Replacing Existing Fastrack Supreme or
14)
13
Installation and Startup
41110485