Wp Module Internal Gpio Mapping - Sierra Wireless Octave FX30S User Manual

WP Module Internal GPIO Mapping

Table D-2
GPIO pin number and to the WP module internal processor GPIO number.
For example, the IOT DETECT function is GPIO25 on the WP module, which maps
internally to GPIO73 on the MDM processor for the WP85 module and to GPIO51 for
WP76/77 modules.
Note: The WP Module GPIO numbers are used for AT commands and Linux GPIO sysfs. The MDM
Processor GPIO is typically used for kernel development.
FX30 Functions
and Signals
(LEDs, IOT card,
GPIO pins, etc.)
Figure D-1: FX30S GPIO Hierarchy
Table D-2: WP Module Internal GPIO Mapping
FX30S Function
IOT DETECT
IOT GPIO1
IOT GPIO2
IOT GPIO3
IOT GPIO4
PB
DIGITAL INPUT1
DIGITAL INPUT2
DIGITAL INPUT3
Rev. 5 September 2020
shows the mapping of the FX30S function (or signal name) to the WP module
LEDs
WP Module
GPIO
GPIO Pins
WP Module GPIO
GPIO25
GPIO42
GPIO33
GPIO13
GPIO8
GPIO7
GPIO2
GPIO21
GPIO22
FX30
WP Module
MDM Processor
Processor GPIO
WP85
79
IOT Card
Processor GPIO
WP76/77
73 51
80 79
78 78
84 76
29 58
79 16
59 38
50 8
49 9
41110485