Operating A Projector From Your Computer - Epson EB-G6170 User Manual

Monitoring and Controlling
• Monitoring and control with application software
You can use Crestron RoomView
Server Edition provided by Crestron
to communicate with the help desk, and to send emergency messages. See
the following Web site for details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using
a Web browser.
a
• You can only enter single-byte alphanumeric characters and symbols.
• The following functions cannot be used while using Crestron
®
RoomView .
s "Changing Settings Using a Web Browser (Web Control)"
p.160
Message Broadcasting (EasyMP Monitor plug-in)
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode

Operating a projector from your computer

Displaying the operation window
Check the following before carrying out any operations.
• Make sure the computer and projector are connected to the network.
• Set Crestron RoomView to On from the Network menu.
Network - Administrator Settings - Crestron RoomView
s
a
Start the Web browser on the computer.
®
Express or Crestron RoomView
®
to monitor devices in the system,
p.96
p.109
b
Enter the IP address of the projector in the address field of the
®
Web browser, and press the Enter key on the keyboard.
The operation window is displayed.
Using the operation window
A
You can perform the following operations when you click the buttons.
Button
Power
Vol-/Vol+
Function
Turns the projector power on or off.
Adjusts the volume.
168