Part Names and Functions
Name
G
Air intake vent
Takes in air to cool the projector internally. Be sure to
(air filter)
clean the air filter regularly.
s "Cleaning the Air Filter"
s "Replacing the Air Filter"
H
Installs the optional handle.
Handle securing
section (6 points)
s "Optional Accessories"
You can also use this for custom installation mounts
designed by the customer.
I
The color of the indicators and whether they are flashing
Status indicators
or lit indicate the status of the projector.
s "Reading the Indicators"
Function
p.175
p.179
p.205
p.148
Rear/side
Name
A
Exhaust vent for air used to cool the projector internally.
Air exhaust vent
• Remove this when connecting the optional wireless
B
Wireless LAN unit port
LAN unit.
cover
s "Installing the Wireless LAN Unit"
• Remove this when using the batch setup function.
s "Batch Setup"
Function
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the air exhaust vent. Hot air from the air exhaust
vent could cause burns, warping, or accidents to
occur.
p.138
15
p.48