Part Names And Functions; Front/Top - Epson EB-Z8355WUNL User Manual

Part Names and Functions

Front/Top

The illustration shows the projector with a standard zoom lens installed.
Name
A
Use these handles when carrying the projector. Also, you
Handle
can pass an anti-theft wire lock through the handles to
secure the projector. s
Function
p.43
Caution
Do not carry the projector by one person.
Two people are needed to unpack or carry the pro-
jector.
Name
B
The Security slot is compatible with the Microsaver
Security slot( )
Security System manufactured by Kensington.
p.43
s
C
Takes in air to cool the projector internally. If dust collects
Air intake vent
here it can cause the internal temperature to rise, and this
(Air filter)
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly. s p.98,
D
Front adjustable foot When set up on a desk, turn to extend and retract to adjust
the horizontal tilt.
The front adjustable feet can be removed when the
projector is installed on a ceiling. s
E
Front cover Remove this cover to remove or install the lens unit when
replacing the lens. s
This cover must be installed when using the projector.
F
Remote Receiver Receives signals from the remote control. s
G
Interface cover Remove this cover to connect cables to the ports inside
when connecting the projector to video equipment.
s p.13,
H
Images are projected through here.
Projection lens
I
Opens and closes the interface cover. s
Interface cover open/
close switch
J
Attach the optional Ceiling mount here when suspending
Ceiling mount fixing
the projector from a ceiling. s p.130,
points
(Four points)
Function
p.104
p.168
p.162
p.18
p.166
p.166
p.170
11