Outgoing Call; Pre-Dial; Post-Dial With Headset Button; Dial Using A Pre-Programmed Number - ASCOM d63 User Manual

User Manual
Ascom d63 DECT Handset
5.3

Outgoing Call

5.3.1

Pre-Dial

Enter the number and press
Soft key "Clear" can be pressed to erase the number if required. The navigation key can be
used to step, add or delete digits from the middle of a number.
An international number can be dialled from the handset by entering a + character followed
by the country code and local number. To enter the + character, long press the 0 key until
the character is shown in the display.
5.3.2

Post-Dial with Headset Button

The headset button can be used to obtain a dial tone and dial a number. However, the
headset must have been configured via the WinPDM/Device Manager to allow this.
5.3.3

Dial Using a Pre-programmed Number

NOTE: The support for Multifunction button is dependent on what model of handset that is
used. For more information, see
A Navigation key, Hot key, Soft key or Multifunction button can be programmed with a
handset number, as described in section
also be programmed with a handset number as long as it has been configured by the
administrator via the WinPDM/Device Manager.
To dial a pre-programmed number, press the pre-programmed key or button. The call is
connected automatically.
5.3.4

Dial a Number from the Call list

1 Press
2 Select a number press
the call is started. Press "More" and select "Edit number".
5.3.5

Dial Last Called Number with Headset Button

If a headset is used, the headset button can be used to dial the last called number. However,
the headset must have been configured via the WinPDM/Device Manager to allow this.
28 June 2016 / Ver. PA5
to get the line. The number is displayed while dialling. The
1.2 Functions and Accessories
3.6 Shortcuts
.
or soft key "Call" to dial. The number can be edited before
on page 2.
on page 18. A headset button can
TD 93119EN
26