Taylor-Dunn SC-100-24 Operation, T Roubleshooting And Replacement Parts Manual page 90

Maintenance, Service, and Repair
17. Install the locking roll pins into the housing and cover to lock the ring nuts in place.
18. Remove the pinion gear holding tool.
19. Install the primary reduction gear case, axles and housings, motor, and install the complete drive onto
the vehicle.
20. Fill the drive with oil. Refer to the
Change Oil
section for information regarding the proper oil level..
21. Lower the vehicle.
22. Reconnect the main positive and negative cables at the batteries.
23. Remove the blocks from behind the wheels.
24. Test drive the vehicle.
Page 18
Lube Chart
section for information regarding type of oil. Refer to