Standard Periodic Maintenance Schedule For The Smart View Display - Taylor-Dunn SC-100-24 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS
STANDARD PERIODIC MAINTENANCE SCHEDULE
FOR THE SMART VIEW DISPLAY
NOTE: The maintenance function is optional. Your vehicle may be equipped with a customized
maintenance schedule
Preventative maintenance Schedule
MAINTENANCE
LEVEL
1
2
3
1, 2, 3 - See notes on following pages.
Safety Rules
Page 20
HOUR
MAINTENANCE TO BE PERFORMED
INTERVAL
1
Inspect the brake system including the park
brake and mounting harware
Inspect the steering system, tighten the
steering shaft coupler on the steering gear
input shaft
Lubricate the vehicle, check for leaks
500
Inspect safety interlocks
Inspect front and rear wheel bearings
Inspect and adjust fork collar bearings
(3-wheel trucks only)
Inspect and tighten all nuts and bolts. First
500 hours and then every 1000 hours.
Inspect and tighten all nuts and bolts
Clean and repack front wheel bearings
Inspect and tighten all wire connection
1000
Inspect the motor brushes and commutator
Inspect the king pin bushings
Check front end alignment
Change oil in the drive and rear axle
Flush hydraulic brake system
2000
Inspect suspension bushings
Replace brake pedal/zzz return spring
Inspect frame for damage
2,3