Table of Contents
Advertisement
AP3000X Overview
Table 7: AP3000X Ports and Connections
Item
1
2
3
LED Status
The Extreme wireless access point has a LED status light that shows the AP's operating
status. A solid white indicates that the AP is working normally. A solid or blinking amber
indicates a potential issue.
Figure 4: AP3000X LED
The following tables show the LED states based on your firmware platform.
Description
Use
Kensington
A security feature used to secure your AP. This is an optional
security slot
task, but it prevents someone from taking the AP.
2.0 USB type A
Used with a thumb drive or other external device.
port
Console port
Micro USB console port for a serial connection between your
management system and the access point. Use the port
when you troubleshoot the AP.
The best practice is to use the Extreme Networks micro
USB cable (ACC-WIFI-MICRO-USB). When you connect to
the device, the management station must have a VT100
emulation program, such as the terminal emulator TeraTerm
Pro or Hilgraeve HyperTerminal®. Set your baud rate to
115200.
ExtremeWireless™ AP3000X Access Point Installation Guide
LED Status
13
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWireless AP3000X and is the answer not in the manual?
Questions and answers