Table of Contents
Advertisement
Installation Process
Mount and Connect the Access Point
Caution
Only qualified personnel must perform installation procedures.
Use these instructions as guidelines for mounting and connecting the AP510i easily and safely.
The AP510i comes with a mounting bracket (#37201) that can be used to mount the AP on a flat T-bar
with flat ceiling tiles, flat surfaces, beams, and some junction boxes. An adapter and brackets are
available for mounting the AP to non-flat ceiling tiles and T-bars. To mount the AP510i on a junction box,
use the optional bracket (WS-MBI-WALL04; #30516). All additional and optional parts are sold
separately. For more information on brackets and accessories, refer to
Accessories Usage
Mounting Brackets and Accessories Usage
The access point comes with the main mounting bracket (#37201; mounting bracket for 802.11ax indoor
access points). There are various optional brackets, an adapter, and bracket accessories that can be
purchased separately.
Table 4: Bracket purchase order information
Part number
37201
30518
30516
37211
Table 5: Bracket purchase order information
Part number
37201
30518
30516
37211
Table 6: Bracket accessory purchase order information
Part number
KT-135628-01
37210
on page 13.
Description
Main mounting bracket for indoor access points (included in the access point
box), along with the 50 mm M3 security screw pack for main mounting bracket
WS-MBI-DCMTR01 bracket
WS-MBI-WALL04 bracket
WS-MBI-DCFLUSH bracket
Description
Main mounting bracket for indoor access points (included in the access point
box), along with the 27 mm M3 security screw pack for main mounting bracket
WS-MBI-DCMTR01 bracket
WS-MBI-WALL04 bracket
WS-MBI-DCFLUSH bracket
Description
Universal mounting kit for wireless LAN (WLAN) access
points
Flat metal easy-attach adapter for main mounting bracket
ExtremeWireless™ AP510i Access Point Installation Guide
Mount and Connect the Access Point
Mounting Brackets and
13
Advertisement
Table of Contents
