Table of Contents
Advertisement
Overview
Access Point Features
AP510i LED Status Indicators
AP510i Powering Methods
The AP510i is a next generation, indoor ceiling mount model enterprise class 802.11ax access point (AP).
The "i" in AP510i indicates that it comes with internal antennas. The AP features a dual-band radio and
comes with eight WiFi internal antennas and one Bluetooth Low Energy (BLE) antenna.
The AP510i can be mounted on a drywall or a wood wall, solid flat ceiling, junction box, and on a
suspended or drop ceiling.
Note
The AP510i requires a minimum base firmware of WiNG 7.1.0.0-138R.
Access Point Features
Learn about AP510i access point radios, side ports, LED, and console information.
The enterprise class 802.11ax AP510i access point has the following features:
•
Radios: 2 radios; 1 IoT radio (2.4 GHz).
•
Console Port: RJ45.
•
◦
1 x 100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45
◦
1 x 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
•
LEDs: 6 – All LEDs will be on during reset (see
•
One reset button.
•
Power: PoE 802.3af; 12VDC external power in connector (see
•
Antennas: – Eight WiFi internal antennas and One BLE internal antenna.
•
Temperature:
◦
0 °C to +50 °C (+32 °F to +122 °F) @ 6000 ft
◦
0 °C to +45 °C (+32 °F to +113 °F) @ Sea Level
•
Enclosure: Plastic only.
on page 7
on page 9
on page 10
AP510i LEDs Status
ExtremeWireless™ AP510i Access Point Installation Guide
for details).
AP510i Powering Methods
for details).
7
Advertisement
Table of Contents
