Mount The Access Point To A Junction Box - Extreme Networks ExtremeWireless AP510i Installation Manual

Installation Process
6. Slide the T-bar ceiling mount bracket base into the back of the access point. The locking tab fits into
a groove in the outside of the AP.
Figure 16: Attach the AP unit onto the WS-MBI-DCMTR01 bracket
7. Hold the AP and rock it back and forth to ensure that it is securely mounted.
8. Attach the Ethernet cable's RJ45 connector to the LAN1 port.
9. Place the ceiling tile back in place.

Mount the Access Point to a Junction Box

About This Task
You can mount the access point to a junction box using the #37201 main mounting bracket that comes
with the unit or a WS-MBI-WALL04 bracket, which must be purchased separately.
Note
The junction box models are limited to USA box models when using the #37201 main
mounting bracket.
Mount the Access Point to a Junction Box
ExtremeWireless™ AP510i Access Point Installation Guide 31