Operation; Modes Of Operation; Normal Mode; Secure Mode - Rosslare AC-F Series Installation And Programming Manual

Operation

4. Operation
• In the Operation chapter, "code" refers to a PIN code or
proximity card depending on the unit you have.
• Memory slots can be a proximity card or PIN code depending on
the unit you have.
4.1

Modes of Operation

In case of power failure, once the power is restored, the
controller returns to Normal mode for security reasons.
There are three modes of operation.
4.1.1

Normal Mode

The left LED is green.
Normal mode is the default mode. In Normal mode, the door is
locked until a valid primary code is presented to the controller.
The controller can only be programmed in Normal mode.
4.1.2

Secure Mode

The left LED is red.
Only Secure and Master users can access the premises in
Secured mode.
A Secure user must enter the Primary and Secondary codes to
gain entry. After entering the Primary code, the right LED flashes
AC-F/G4x Series Installation and Programming Manual
Green
Red
23