Rosslare AC-F Series Installation And Programming Manual page 58

Programming
The controller is now waiting for the Primary code of the
user to whom you want to add a Secondary code.
4. Perform one of the following:
Enter the PIN code belonging to the user
for whom you wish to add a Secondary
code.
Present the user card belonging to the user for whom you
wish to add a Secondary code.
The left LED flashes red.
If the Primary code entered is not valid, you hear a long
beep and the unit continues to wait for a valid Primary code.
5. Perform one of the following:
Enter the PIN code to be used as the

Secondary code.
Present the user card to be used as the Secondary code.

If the Secondary code is valid, the controller beeps three
times and returns to Normal mode.
If the Secondary code is invalid, the controller sounds a long
beep, and the unit continues to wait for a valid Secondary
code to be entered.
AC-F/G4x Series Installation and Programming Manual
Red Orange
57